Finished drywall in a clean commercial interior

Salt Lake County Service Area

Drywall Repair in Murray, Utah

Need drywall work in Murray? Daniel Costa handles repairs, new drywall, finishing, texture, ceiling work, and commercial interiors throughout the area. Utah Drywall & Repair comes to the project; there is no walk-in Murray shop.

Start with a few clear photos, rough measurements, and the project address. Call 801-406-3080 or request an estimate online. Daniel can often tell from that whether he can price the work remotely or needs to see the room first.

Drywall Work Daniel Handles in Murray

  • Drywall repair for holes, cracks, plumbing or electrical access cuts, loose tape, and damaged corners.
  • Drywall installation for basements, remodels, additions, replacement sections, and new rooms.
  • Drywall finishing and texture for tape, compound, sanding, orange peel, knockdown, smooth walls, and blended repairs.
  • Ceiling work for damaged board, cracks, access openings, water damage after the source is fixed, and popcorn removal.
  • Commercial drywall for tenant improvements, managed properties, offices, restaurants, and scheduled work zones.

Connect Murray drywall repairs with the work behind them

When plumbing or electrical work creates openings at a Murray property, number each cutout and show both a close view and its place on the full wall or ceiling. If the underlying trade can leave sound, regular edges with room for backing, the drywall repair is easier to define than a group of jagged holes. Do not close an opening until the service work is complete. The estimate should identify board thickness, insulation, attachment support, nearby trim, texture, and whether the final surface is expected to be ready for primer or for further preparation.

A building that remains occupied needs a route and a boundary for every phase. If the repair is in a home, show furniture, floors, and the path from the entry. When the surface is in an office or customer area, mark desks, equipment, and circulation that must stay usable. Shared ceilings can add grid, tile, lighting, or mechanical coordination. Wide photos reveal these relationships better than dimensions by themselves, while room names and labels prevent repeated utility openings from being mixed up during estimating and later walkthroughs.

Give each trade a clear point of handoff

If a Murray business operates beside the work, identify which dusty or noisy stages need a separate window and which areas can close temporarily. Exit routes and required access should remain part of the phasing conversation. When alarms, sprinklers, grilles, data lines, or fixtures are affected, the appropriate trade needs an assigned role before drywall work reaches that point. Define who opens the surface, who completes work inside it, who restores board and texture, and who paints. That sequence keeps responsibilities visible rather than relying on jobsite assumptions.

For a residential remodel, check framing and rough changes before installing drywall. If an addition or altered room meets an existing plane, compare panel thickness, alignment, corner treatment, and texture at each junction. Long surfaces under directional light may justify wider preparation than a closet wall, but that choice should follow the room rather than a blanket finish label. Keep permanent flooring and cabinetry outside the active sequence when possible. If they are already installed, specify masking, edge protection, and cleanup in the written scope before hanging or sanding starts.

What to Send With Your Estimate Request

Send one wide photo, one close-up, rough measurements, ceiling height, and what caused the damage. Add notes about texture, painting, access, and timing. If water is involved, fix the source and let the area dry before it is closed. Mention any known or suspected mold, asbestos, lead paint, or other safety concern before anything is disturbed. Daniel handles drywall; testing and remediation need the right specialist when those issues may be present.

Nearby City Service Areas

Return to the Salt Lake County drywall service hub or browse all Utah Drywall service areas.

Who Will Be Doing the Work

Daniel Costa operates Utah Drywall & Repair through D&E Services, LLC. He has more than 20 years of drywall experience and holds Utah contractor license 12011253-5501 with the S270 Drywall, Paint and Plastering classification. His workmanship guarantee applies to the drywall and finish work listed in the written scope.

Common Questions

Can drywall repairs follow plumbing or electrical access work in Murray?

Yes. Keep cutouts orderly when practical, confirm the underlying repair is complete, and provide the number, size, location, texture, access, and trim conditions for each opening.

Does Utah Drywall provide free estimates in Murray?

Yes. Send photos, rough measurements, and the project address. Daniel will let you know whether he can quote it from that information or should see it in person first.

Can you match an existing wall or ceiling texture in Murray?

Usually, but the age of the texture, paint buildup, lighting, and repair size all matter. Sometimes widening the blend or refinishing to a natural break looks better than trying to hide a tight patch.

Get a Drywall Estimate in Murray

Request an Estimate or call 801-406-3080.

Ready for an Estimate?

Send Daniel the room, the damage, and the result you want.

Small repairs can often be scheduled within 24 hours. Larger projects are typically scheduled within one to two weeks, depending on scope and availability.

Request Estimate801-406-3080